XX Simposio Internacional de Ingeniería Eléctrica "SIE 2023"

XX Simposio Internacional de Ingeniería Eléctrica

SIE 2023

Loading Video...
Caracterización de un Prototipo de Aerogenerador Eólico de Baja Potencia para interconexión a la red

Resumen

En este artículo se diseñó un prototipo de un aerogenerador eólico de baja potencia interconectado a la RED y el convertidor electrónico controlado para la rectificación del voltaje generado, el cual se utiliza para el acondicionamiento de la potencia eléctrica generada por sistemas eólicos de baja potencia para la conexión a la red eléctrica. Utilizando diferentes componentes electrónicos y placas de desarrollo de hardware libre, se llevó a cabo la construcción de un prototipo de rectificador trifásico controlado, dividido en 3 módulos, el primero encargado de obtener una señal de referencia y sincronización del voltaje que se va a rectificar, el segundo el circuito de control, que realiza los cálculos de tiempos para la activación del tercer módulo, encargado de rectificar el voltaje trifásico utilizando tiristores (SCR), en el cual se puede controlar el momento de activación de los semiconductores. Finalmente, se realizaron pruebas del prototipo conectado a un aerogenerador construido por docentes y alumnos de la Universidad Tecnológica de Campeche, comprobando su correcto funcionamiento en la rectificación del voltaje entregado por este generador

Abstract

In this article, a prototype of a low power wind turbine interconnected to the NETWORK and the controlled electronic converter for the rectification of the generated voltage was designed, which is used for the conditioning of the electrical power generated by low power wind systems for the Connection to the electric grid. Using different electronic components and free hardware development boards, the construction of a controlled three-phase rectifier prototype was carried out, divided into 3 modules, the first one in charge of obtaining a reference signal and synchronization of the voltage to be rectified, the second is the control circuit, which performs the time calculations for the activation of the third module, in charge of rectifying the triphasic voltage using thyristors (SCR), in which the moment of activation of the semiconductors can be controlled. Finally, tests of the prototype connected to a wind turbine built by teachers and students of the Technological University of Campeche were carried out, verifying its correct operation in the rectification of the voltage delivered by this generator.

Sobre el ponente

Dr. Jorge De La Torre y Ramos

Dr. Jorge De La Torre y Ramos

Universidad Autónoma de Zacatecas Flag of México

Discussion

Información Práctica
No Presencial
Spanish / Español
noviembre 14, 2023 11:0 a. m.
10 minutos
Salón 2 SIE
Autores
Dr. Francisco Eneldo López Monteagudo
M. en I. Juan Carlos Guerrero Luján
Dr. Jorge De La Torre y Ramos
Dr. Emilio Álvarez García
Dra. Leticia del Carmen Ríos Rodríguez
M. en I. José Manuel Gámez Medina
Dr. Leonel Ruvalcaba Arredondo
Palabras clave
convertidores electrónicos
electronic converters
generadores eólicos
sistemas eólicos; interconexión a la red
wind generators
wind systems; network interconnection
Documentos